Issue#624324: Quadcopter - Syma x8c vs JJRC H26 vs JXD 509g

  • So! I'm still trying to get a refund for my Kai Deng K70c. Meanwhile, I need another toy-grade quad. While I really want a brushless quadcopter, they're really expensive for me, but I may get the JJRC X1 some day soon.

    What I need at the moment is a lasting camera bird. As my title suggests, I have three copters in mind.

    I love altitude hold, with the JXD 509 has, but I don't think that it has enough power to lift a GoPro. Does it?

    I know the Syma x8c carries a GoPro, and I've seen some...

    Syma x8c vs JJRC H26 vs JXD 509g

    0 Answers

    Sorry, your answer is too short !

  • Issue#390623: Quadcopter - Syma X8C Binding Issue

    I recently bought a Syma X8C for my first quad and to use for some videos. I have only flown it maybe 2-3 times. Only one time outdoors and I have not crashed it or damaged it in anyway. The only thing I have done is attached my anti-vibration plate for filming. The first flight went extremely well, I had no issues and was very impressed for what it was for the price. Since then, It has been nothing but headaches. I can rarely been able to bind my transmitter to the quad. The times I have... Syma X8C Binding Issue

  • Issue#1088789: Quadcopter - Micro SD Card Issue - JXD 509G

    Hello all, This is my first post so bear with me. My name is Mike and I am an absolute newbie to the world of Quadcopters. I just bought a low cost drone to see how I liked and would get on with them, and I love it. The one I purchased is the JXD 509G and I'm already looking to upgrade somewhat. For now I am enjoying this and as it is so cheap I'd rather keep playing for a while before I crash anything of more value. The issue I have is the Micro SD card - firstly, only the first video... Micro SD Card Issue - JXD 509G

  • Issue#79083: Radio Control - JXD 509G JXD509G 5.8G FPV With 2.0MP HD Camera High Hold Mode RC Quadcopter

    JXD 509G JXD509G 5.8G FPV With 2.0MP HD Camera High Hold Mode RC Quadcopter I bought a JXD 385 a couple of years ago when I was flying Wltoys V202s and V252s and it was a good quad at that time that competed with the Wltoys quads well. It came with a transmitter that did not include autoflips at 100% rates like the V252 tx and had the same protocol as the Wltoys, so I used that transmitter for a while to fly the Wltoys quads. The 385 flew very well but did not have good LEDs for night flying. My 385 still works but all four motors have been replaced once. Banggood asked if I would like to review the JXD 509G, I said yes. This is only my second JXD quad. I recieved this quad on 2/01/2016 from Banggood. Good shipping time of only 14 days using China Post. You can find it here: http://www.banggood.com/JXD-509G-JXD...p-1001776.html Attachment 8680835 First Impressions As mentioned in the other JXD 509 threads this quad copies the design of the Yuneec Q500, a larger quad that I am

  • Issue#79084: Radio Control - JXD 509v and Syma X8c Flying Together

    My son and I took out the Syma X8c and JXD 509v out flying together the other day,good times :)He likes the altitude hold and auto land on the JXD,I like it pretty well also .Got a little on board video coparison as well. JXD 509v and Syma X8c Flying Together(and making a little "jello") (9 min 16 sec)

  • Issue#81615: Quadcopter - Syma X8C VS Ei-Hi Large Size S800C

    Hi I'm looking to get a "large" quadcopter. I have narrowed it down to these 2, Syma X8C vs Ei-Hi Large Size S800C. I have a Syma X5SW that seems to be a bit finicky at times and the wifi camera just will not stay connected. Just looking to go a bit bigger. What are your thoughts.

  • Issue#95603: Radio Control - JXD 509G 5.8 GHz FPV Quadcopter with Altitude Hold (work in progress)

    One of the current hypes in cheap RTF "multirotor-country" is altitude hold. The idea is to make flying easier, as throttle control is one of the hardest functions to grasp, for fresh pilots. Another benefit should be, to have a more stable platform for shooting video. Will this work out as intended? A closer look at the JXD 509G might give some answers. Disclaimer: I don't get paid, or in any other way make money with reviews like these. Product specifications and quality may vary at the manufacturer's discretion, and are beyond my influence. I cannot guarantuee you will get a product that performs exactly the same as seen and described in this review. For easy navigation, here's a list of contents: 1: Specifications (posting #1) 2: Unboxing (posting #1) 3: Transmitter (posting #1) 4: Flying Performance (posting #1) 5: Preliminary Verdict (posting #1) 6: Suitable for a Beginner? (posting #1) 7: Camera & FPV Performance (posting #2) 8: Hints, Tips & Modification

  • Issue#107420: Quadcopter - Syma X8c Flying In The Snow

    Snowing outside,why not go out for a flight in it Here is a video I took of my flight with the Syma X8c in a light snow storm

  • Issue#124521: Quadcopter - Flying My Syma X8C After Snowstorm

    Flying after the snowstorm

  • Issue#130107: Quadcopter - DJI Landing Skids On A Syma X8C

    Got them in the mail. Looks good!

  • Issue#144282: Quadcopter - syma x8g issue

    i just got my x8g last weekend, and this is my first ever quad. then i tried it indoor, just flying 2 feet just to check if its working then i accidentally push the throttle up and it some how crashed to a wall, then 2 right rotor is facing the floor and somehow prevented them from rotating and one of the blade also got twisted, i replaced the blade with one of the reserved and calibrated the rotor as well but when i tried to fly it again it seems that the right side is not lifting anymore... syma x8g issue

  • Issue#163552: Quadcopter - Syma X8C (white) on the list next.

    The Syma X8C is close to being ordered..Ive been on a spending spree if some couldnt tell..hahaha. Ive seen alot of the stock 2mp camera videos and to me the quality of the video wasn't all that bad but all suffered from major jello effect...I think removing that jellow will produce a decent video. I plan to come up with a fix for that issue first then use the same camera case to go with an FPV system...I'll remove the camera guts and install a new receiver/antenna and camera lens mounted... Syma X8C (white) on the list next.

  • Issue#192916: Quadcopter - Syma X8C pulsating

    My X8C's motors are pulsating and not creating constant thrust. It is confined mainly to one motor. Up to this point I have done the following: adjusted trim,cleaned, greased, replaced props, replaced motors, verified rotation and position of each, replaced the main board, replaced the hand held controller, performed the copter reset several times. When I hold the copter in a 30 degree tilt towards the pulsating motor the pulsating pretty much stops. If someone could has some... Syma X8C pulsating

  • Issue#193673: Quadcopter - Syma X8C ordered.

    Was time to pull the trigger on the x8c so i did so not 2 minutes before this typing. As with most any model i end up with ill do an X8 thread to show my personal findings and possible upgrades with the model. The X8C will also be the base for my entry into the FPV world.

  • Issue#196091: Quadcopter - SYMA X8C Modifications thread.

    I ordered this model early this morning...Its power capabilities and size seem like a great start to get me into FPV and work on some video taking skills..I love my smaller quads but this one will have its own place for me. As with most all models, ive checked out the videos and threads all over the internet and as usual i see some things i like and some i dont. The very first thing i plan to do before i even power this quad up is balance the props....Un balanced props can wreck havoc to... SYMA X8C Modifications thread.

  • Issue#423994: Quadcopter - syma x8c

    Does not respond to commands.left is right forward is backward.left stick will not turn quad right stick does. Help.

  • Issue#428127: Radio Control - Syma X8 HG or JXD 509G

    If you had a choice to make which one would you buy. This will be my first quad, but I've flown gas and electic heli's for many years. I wanted to get something to practice on before I get a Yuneec Q500+ later this summer. Please don't start suggesting other quads, as I've narrowed my search down to these 2. Thanks, jjp

  • Issue#517866: Quadcopter - Syma x13 motor issue...

    I just bought this quadcopter last week. It's the first one I've ever had and I love it. I expected the time would come that I would have to repair it though... There was no spectacular crash. It just stopped working. I just turned it on, started flying it. One minute into enjoyment, it started falling down after only about 3 seconds in the air. It flew, but just a few seconds at a time. Then after doing that about ten times, it stopped flying altogether. I discovered that one of the... Syma x13 motor issue...

  • Issue#582263: Quadcopter - Syma X5C-1 or Syma X8C Venture for a beginner?

    This is my first post on QC forum. I'm a total noob,looking for a first drone (s).I am retired and live in the Philippines,and am going to buy a quadcopter and have family send it to me here.I don't get to have things sent to me here very often,and because of that,I probably have a tendency to take a bigger risk then I might otherwise. but then again,I really need reliability. What I would like to buy is a good performing reliable camera drone,and a reasonably fast racing type drone.I... Syma X5C-1 or Syma X8C Venture for a beginner?

  • Issue#592194: Radio Control - has anyone resolved the infamous JXD 509G binding issue?

    Hi everyone, been having a blast ever since i received my jxd 509G. a home made cloverleaf antenna on the fpv receiver has breathed new life into this thing! but in the last few days i've started having binding issues... after the binding procedure the LEDS keep blinking for a while and then they start blinking very quickly, like a strobe effect. it seems like it isn't binded at all but if if bring both sticks down and in the LEDS on the quad start flashing as if i'm calibrating the gyro!!! but it stil won't start, and no other buttons work either (lights, video...) what is this all about!?!?! it can take me SEVERAL attemps before i am finally able to bind. always seems to be a crapshoot. so i've read about this issue a lot but wasn't able to find a definitive fix or procedure... what is your experience with this? i want to get this right from the start!!! thanks!

  • Issue#650228: Quadcopter - Syma x8c Finally flying......problem

    so I replace the motors and gears . I got it flying a little but I am having a problem keeping it hovering. Any tips on calibrating it? Or is there a way ?

  • Issue#653948: Radio Control - Syma X8C Drone Venture Quadcopter Assembly

    Name: Syma X8C Venture Drone 2.4G 4CH 6 Axis Gyro RC Quadcopter Color: Black, Orange, White Frequency: 2.4G Channel: 4CH 6 Axis Control Distance: 100m Flying Time: about 7mins Charging time: About 200mins Battery: 7.4V 2000mAh Li-on Product Size: 50 x 50 x 19 cm Box Size: 35 x 35 x 17cm Package Weight: About 1856g Features: With camera, can take video and picture. With headless mode function. The 6-axis system allows the quad to be hand launched. 6-Axis gyro quad-rotorcraft flight, strong stability,can easily implement various flight movements, stronger wind resistance, easier to control. 2.4 technology adopted for anti-interference.even more than one quadcopter is flying at the same time they will not interfere with each other. The quadcopter can fly both indoor and outdoor.Including 4CH digital proportional RC system. Function: Video/Photograph/Raise & Down/Forwards & Backwards/Left & Right Turning/Left & Right Flying/Hovering/360 Degree Rotating Package Included:

  • Issue#686303: Radio Control - Syma x8c issue

    Hi, I've tried searching for an answer but can't find one. I recently bought a syma x8c and it will now not take off. It wobbles badly but never leaves the ground. Does anyone know what could be wrong with it? I'll try and attach a video. Thanks in advance, Josh

  • Issue#692201: Quadcopter - In persuit of the best camera mount for the Syma X8C

    I got an X8C as my first quad, never flown before so I've spent the last couple of months learning and practicing, a lot. I actually have two X8C's, because of this. One thing you'll find every single X8C owner are saying is that the stock camera is rubish, it looks nice but there's no way you can get decent photos or video with it. So I've got myself a... In persuit of the best camera mount for the Syma X8C

  • Issue#792794: Quadcopter - New guy's first post offers solution to Syma X5C-1 issue

    I've been a member here now for about a week. It is going to be amazing. What I joined for initially was to see if I could find a cure for the problem with my new Syma X5C-1. I have seen dozens of youtube videos and many responses here but none worked for my new quad. So for my first post I'm including a link to a Youtube video I just uploaded before stepping out to fly my working Syma X5C.

  • Issue#898751: Quadcopter - Syma X8C Acting Weird Won't Fly

    Hello, This is my first post here. Unfortunately, it comes because I'm having problems and looking for someone to help point me in the right direction. I've had my X8C for over a week and have had zero problems with it. I took it to a friends house yesterday, let him fly it, and there were a few small crashes, nothing major by any means, and when he gave the controller back I noticed the the X8C would pull hard left in the air. I put it on the ground, and now when you try to... Syma X8C Acting Weird Won't Fly

  • Issue#945325: Quadcopter - JXD 509G

    Hello everyone. New to the forum & new to the hobby. Decided on a cheap Chinese knock off drone to get the practice I need before proceeding to the real deal in the future. I spent 2 weeks doing detailed research & finally decided on a JXD 509G. I think it's perfect to start with. After reading reviews on all these quads, i already purchased 2 spare batteries & a clover Antena for the display. I will be modifying the camera support with foam to fix the jello & i will also be modifying the... JXD 509G

  • Issue#950275: Quadcopter - New to the hobby (JXD 509G)

    Hello everyone. New to the forum & new to the hobby. Decided on a cheap Chinese knock off drone to get the practice I need before proceeding to the real deal in the future. I spent 2 weeks doing detailed research & finally decided on a JXD 509G. I think it's perfect to start with. After reading reviews on all these quads, i already purchased 2 spare batteries & a clover Antena for the display. I will be modifying the camera support with foam to fix the jello & i will also be modifying the... New to the hobby (JXD 509G)

  • Issue#975913: Quadcopter - Mount RunCam To Syma X8C

    Just a quick question. Anyone here have a Runcam mounted to a Syma X8C? If so what did you use to mount it? The included mount looks like it has some options as far as using Velcro, Zip Ties, drilling a hole in the drone itself and putting some screws in there? Just looking for a decent option. I just got the camera Sunday, mounted it with some Velcro last night and took it easy on my test flight, but I did manage to drop the camera from a few feet off the ground after doing a roll /... Mount RunCam To Syma X8C

  • Issue#1076685: Radio Control - How To Assemble The JJRC H26 Rc Quadcopter

    How To Assemble The JJRC H26 Rc Quadcopter (8 min 19 sec)